Winchester 1897 Takedown 12 gauge

//Winchester 1897 Takedown 12 gauge

Winchester 1897 Takedown 12 gauge



MODEL: 1897




ACTION: Pump      

TYPE: Slam Fire      

BARREL LENGTH: 28”      

LOP: 14”





The Winchester Model 1897 was designed by American firearms inventor John Moses Browning. The Model 1897 was first listed for sale in the November 1897 Winchester catalog as a 12 gauge solid frame. The 12 gauge takedown was added in October 1898, and the 16 gauge takedown in February 1900. Originally produced as a tougher, stronger and more improved version of the Winchester 1893, itself an improvement on the early Spencer pump gun, the 1897 was identical to its forerunner, except that the receiver was thicker and allowed for use of smokeless powder shells, which were not common at the time. The 1897 introduced a “take down” design, where the barrel could be taken off – a standard in pump shotguns made today, like the Remington 870 and Mossberg 500 series. Over time, “the model 97 became the most popular shotgun on the American market and established a standard of performance by which other kinds and makes of shotguns were judged, including the most expensive imported articles”. The Winchester Model 1897 was in production from 1897 until 1957. It was in this time frame that the “modern” hammerless designs became common, like the Winchester Model 1912 and the Remington 870. The Model 1897 was superseded by the Winchester Model 1912. However, the gun can still be found today in regular use.
While designing the new Model 1897, many of the weaknesses present in the earlier Model 1893 were taken into account and remedied. These improvements included:
The frame was strengthened and made longer to handle a 12 gauge ​2 3⁄4-inch shell, as well as the ​2 5/8-inch shell.
The top of the frame was covered so that the ejection of the fired shell was entirely from the side. This added a great amount of strength to the frame of the gun and it allowed the use of a ​2 3⁄4 inch shell without the danger of the gun constantly jamming.
The action could not be opened until a slight forward movement of the slide handle released the action slide lock. In firing, the recoil of the shotgun gave a slight forward motion to the slide handle and released the action slide lock which enabled immediate opening of the action. In the absence of any recoil, the slide handle had to be pushed forward manually in order to release the action slide lock.
A movable cartridge guide was placed on the right side of the carrier block to prevent the escape of the shell when the shotgun was turned sideways in the act of loading.
The stock was made longer and with less drop.
Of these improvements, the slide lock is the one that made the Model 1897 into a safe firearm. This improved slide lock kept the shotgun locked until actual firing occurred which prevented it from jamming in the case of a misfire. The slide lock “stands in such a relation to the body of the firing pin as will prevent the firing pin reaching the primer until the pin has moved forward a sufficient distance to insure locking of the breech bolt”. This prevents the action sleeve “from being retracted by the hand of the gunner until after firing, and hence rendering the firearm more safe”.


There are no reviews yet.

Be the first to review “Winchester 1897 Takedown 12 gauge”

Your email address will not be published. Required fields are marked *